Care & Cleaning - Breville the Fast Slow GO Mode D'emploi

Care & Cleaning
Before cleaning, remove the power plug from
the power outlet and remove the connector
end of the power cord from the cooker base.
Allow the cooker and all accessories to cool
completely before disassembling and cleaning.
Wash removable cooking vessel with warm
soapy water and a clean soft cloth or sponge.
Rinse with clean water and dry thoroughly.
NOTE
Removable cooking bowl can be washed in
dishwasher, but it is recommended to wash
cooking bowl in hot, soapy water using a
mild household detergent. Rinse and dry
thoroughly.
WARNING
• Do not use abrasive cleaners, steel wool or
scouring pads on the outer and inner body of
the appliance.
• Do not immerse metal base or power cord in
water or any other liquid as they may cause
electrocution.
• Ensure removable cooking bowl is correctly
positioned in the base before you commence
cooking.
22
DISASSEMBLE LID:
• Gently pull the silicone rubber gasket
out from under the gasket holder. Check
periodically that it is clean, flexible and
not cracked or torn. If damaged do not use
the appliance.
• Wash the inside of the lid with a wet, soapy
sponge or cloth. Use a brush to remove oil
residue if necessary. Wipe dry with a clean,
damp cloth.
• Regularly inspect that Pressure Release
Valve Cover is clean and free of liquid/food.
Remove pressure release valve cover from
the lid and wipe with a soapy cloth. Rinse, dry
well and replace by clipping back in place.
• Pressure Safety Valve will need to be
regularly checked and cleaned in order to
avoid any clogging which could result in
blocking the safety valve. Wash and clean any
oil or food residue. Ensure the valve moves in
and out smoothly after cleaning