Noise/Vibration Information; Product Features - Bosch GBH 2-26 E Professional Notice Originale

OBJ_BUCH-279-002.book Page 20 Wednesday, November 14, 2007 12:41 PM
20 | English

Noise/Vibration Information

Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 91 dB(A);
Sound power level 102 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
GBH 2-26 E/RE
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Hammer drilling into concrete: Vibration emis-
2
sion value a =15 m/s , Uncertainty K=1.5 m/s
h
GBH 2-26 DE/DRE/DFR
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Hammer drilling into concrete: Vibration emis-
2
sion value a =15 m/s , Uncertainty K=1.5 m/s
h
Chiselling: Vibration emission value a
2
Uncertainty K=1.5 m/s .
GBH 2-26 E/RE/DE/DRE/DFR
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with differ-
ent accessories or poorly maintained, the vibra-
tion emission may differ. This may significantly
increase the exposure level over the total work-
ing period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
1 619 929 726 | (14.11.07)

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Quick change keyless chuck (GBH 2-26 DFR)
2 SDS-plus quick change chuck
(GBH 2-26 DFR)
3 SDS-plus tool holder
4 Dust protection cap
5 Locking sleeve
6 Lock ring for rapid-change chuck
(GBH 2-26 DFR)
7 Rotational direction switch
2
.
(GBH 2-26 RE/DRE/DFR)
8 Lock-on button for On/Off switch
9 On/Off switch
10 Release button for mode selector switch
(GBH 2-26 DE/DRE/DFR)
11 Mode selector switch
2
,
(GBH 2-26 DE/DRE/DFR)
2
=14 m/s ,
h
12 Button for depth stop adjustment
13 Depth stop
14 Auxiliary handle
15 Release button for drilling/hammer drilling
selector switch (GBH 2-26 E/RE)
16 Selector switch for drilling/hammer drilling
(GBH 2-26 E/RE)
17 Securing screw for key type drill chuck*
18 Key type drill chuck*
19 SDS-plus adapter shank for drill chuck*
20 Drill chuck mounting (GBH 2-26 DFR)
21 Front sleeve of the quick change keyless
chuck (GBH 2-26 DFR)
22 Retaining ring of the quick change keyless
chuck (GBH 2-26 DFR)
23 Extraction sleeve of the dust extraction
attachment*
24 Clamping screw for the dust extraction
attachment*
25 Depth stop of the dust extraction attachment*
26 Telescopic pipe of the dust extraction
attachment*
27 Wing bolt of the dust extraction attachment*
28 Guide pipe of the dust extraction attachment*
29 Universal bit holder with SDS-plus shank*
*The accessories illustrated or described are not
included as standard delivery.
Bosch Power Tools