ProBreeze PB-AC01 Mode D'emploi page 9

Heat Exhaust Hose Installation
1. Unlock and fully open the c-shaped
buckle.
Place the lip of the circular connector over
2.
the bottom step of the heat exhaust hose
connector.
3. Firmly push the circular connector down
into the heat exhaust hose connector to
lock it into place.
Return the c-shaped buckle to secure.
4.
Sliding Windows Sealing Board
Assembly Installation
Insert panel B into panel A and adjust to
1.
the length or height of the window.
2. Open window and place the sealing board
assembly into window.
3. Adjust to ensure an exact fit and secure
with the provided screw.
Close window to lock everything into
4.
place.
5. Attach the heat exhaust hose short
connector to the elliptical hole.
The sealing board assembly is now ready
6.
for use.
Notes:
•
If your window opening is smaller than the
minimum length of the sealing board assembly
trim to desired length using a hack saw.
•
If your window opening is larger than the
maximum length of the sealing board assembly
use plywood or similar to fill the gap.
1
Bottom step
Circular connector
4
Panel B
1
Horizontal Window
4
2
3
5
Vertical Window
2
3
4
3
2
Panel A
5
English | 04 English | 08