Controls; Power Button; Fan Button; Mode Button - ProBreeze PB-AC01 Mode D'emploi

Controls

Power Button

Turn the appliance on and off.

Fan Button

Select between high and low fan speeds.
Note: Option not available in dehumidifying
mode.

Mode Button

• Cooling Mode - Perfect for cooling a room
in hot weather. Use the up and down
buttons when in cooling mode to set the
desired temperature between 16-30°C. The
appliance will cool the room if the room
temperature goes above the set
temperature. If the room temperature goes
below the set temperature the appliance
will stop cooling the room and the fan will
remain operating at the set fan speed.
Note: The heat exhaust hose must be
connected to allow the hot air to be
discharged outside.
•
Fan-Only Mode - The appliance operates
at the set fan speed. Room temperature is
displayed on the digital display panel.
Note: The heat exhaust hose does not have
to be connected to the appliance.
• Dehumidifying Mode - Ideal for reducing
room humidity in humid and damp times of
year. The appliance will dehumidify the room if
the room temperature is greater than or equal
to 17°C and the fan operates at the low fan
speed. If the room temperature decreases to
less than or equal to 15°C the appliance will
stop dehumidifying the room and the fan
operates at the low fan speed. Note: The heat
exhaust hose must be connected to allow the
hot and humid air to be discharged outside.
Note: Temperature can only be set when in
cooling mode.

Sleep Mode

Set a sleep mode to reduce energy consumption
when in cooling mode.
To activate, press the sleep button on the remote
control or both the timer and down buttons on
the control panel at the same time. The display
will blink five times with SL to confirm sleep
mode has been set then revert to the set
temperature.
After two hours the set temperature will increase
automatically by 1°C. After another two hours,
the set temperature will increase automatically by
a further 1°C and the fan speed will change to
low fan speed if it is not already at this fan speed.
The appliance will continue to run at this setting
until turned off.
To cancel sleep mode press the sleep button on
the remote control or both the timer and down
buttons on the control panel at the same time.
English | 04 English | 10