Table des Matières
Publicité
Specifications
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes for
product improvement without prior notice. The performance
specification figures indicated are nominal values of production
speaker. There may be some deviations from these values in
individual speaker.
General
Power source
DC IN 12V
(AC 100 - 240 V ~ 50/60 Hz)
Power
Power on: 14 W
consumption
Power stand-by: 0.6 W (*)
Output power
Front speaker:
RMS: 10 W (5 W + 5 W) (10% T.H.D.)
Center Speaker:
RMS: 7 W (10% T.H.D.)
Subwoofer:
RMS: 15 W (10% T.H.D.)
Speaker
3.1-way Speaker System
Front speakers: 40 mm (1-9/16") Full Range
(x 2)
Impedance: 12 ohms / Channel
Centre Speaker: 40 mm (1-9/16") Full
Range (x 2)
Impedance: 6 ohms
(12 ohms x 2 parallel connections)
Subwoofer: 57 mm (2-1/4") Woofer (x4)
Impedance: 3 ohms
(12 ohms x 4 parallel connections)
Audio output
Subwoofer Pre Out: 10 kohms
terminals
4A: AC/DC adaptor
Input terminals
Analogue input (LINE 1):
RCA type x 1pair (L/R)
500 mV / 47 kohms
Analogue input (LINE 2):
Stereo mini socket Ø 3.5 mm
100 mV / 47 kohms
Coaxial digital input (DIGITAL 1):
RCA type x 1
Optical digital input (DIGITAL 2):
Square type x 1
Dimensions
Width: 985 mm (38-3/4")
Height: 96 mm (3-3/4")
Depth: 70 mm (2-3/4")
Weight
2.2 kg (4.84 lbs.)
(*) This power consumption value is obtained when in the
Touch Sensing off mode (RED).
HT-SB500
ENGLISH
E-20
Publicité
Table des Matières
