Ac Power Connection - Sharp HT-SB500 Mode D'emploi

AC power connection

HT-SB500
Using with the AC/DC adaptor
ENGLISH
1
Plug the AC power lead into the AC/DC adaptor.
2
Plug the AC/DC adaptor cable into the DC IN socket
on the speaker.
3
Plug the AC power lead into a wall socket. The on/stand-by
indicator will turn ORANGE when AC power is applied. The
power indicator will turn GREEN when the system in "ON".
E-13
AC/DC Adaptor Cable
DC IN socket
(DC 12 V)
AC power lead
Wall socket
(AC 100 - 240 V ~ 50/60 Hz)
Notes:
Unplug the AC/DC adaptor from the wall socket if the speaker
will not be used for a long period of time.
Use only the supplied AC/DC adaptor. Using other AC/DC
adaptor may cause an electric shock or fire.
AC/DC Adaptor