Table des Matières
Publicité
Speaker connections to TVs (continued)
HT-SB500
Connecting to a TV
ENGLISH
If the TV/monitor has an audio output, connect it to the LINE IN
1 sockets on the rear of the speaker.
To select LINE IN 1 function:
On speaker: Press FUNCTION button repeatedly until "L1" is
displayed.
On remote control: Press LINE 1-2 button repeatedly until
"L1" is displayed.
E-11
TV
To audio output sockets
RCA cable (supplied)
Speaker
Connecting to a TV (with Headphone socket)
If the TV/monitor has headphone socket, connect it to the LINE
IN 2 socket on the rear of the speaker.
To select LINE IN 2 function:
On speaker: Press FUNCTION button repeatedly until "L2" is
displayed.
On remote control: Press LINE 1-2 button repeatedly until
"L2" is displayed.
To LINE IN 1
sockets
Notes:
If the TV volume is continuously in low level, the speaker will
automatically power off. Increase the TV output volume to
enjoy the sound from the speaker.
If the speaker volume is continuously in very high level, the
speaker will mute and recover after several seconds.
The information display on the sound bar system will not
display anything when increasing or decreasing the volume
level.
TV
To HEADPHONE socket
Audio cable (not supplied)
Speaker
HEADPHONE
To AUDIO LINE
IN 2 socket
Publicité
Table des Matières
