12 Before Start-Up; Connecting The Torch; Connecting The Ground Cable; Select Mains Voltage - LORCH M-Pro BasicPlus Manuel D'utilisation

12 Before start-up

12 .1

Connecting the torch

Connect the central connector 17 of the
Â
torch to the central socket 11.
11
17
Abb. 2: Connecting the torch
12 .2

Connecting the ground cable

Connect welding return cable 18 to con-
Â
nector 10 and secure it by turning it cloc-
kwise.
10
18
Abb. 3: Connecting the ground cable
- 36 -
12 .3

Select mains voltage

(Only for machines with mains voltage
switch-over, refer to technical data )
Set the required voltage by using mains
Â
voltage switch 4.
For 230 V operation, the adapter CEE 16
‰
on shock proof plug (incl. in delivery) may
be used.
Performance values are limited
i
in 230 V mode, i.e. max welding
power is limited to 2/3 of the values
stated in technical data.
12 .4

Fastening the ground clamp

Abb. 4: Correct
Attach the ground clamp immediately be-
Â
side the welding point so that the welding
current will not try to find its own return
path through machine parts, ball bearings
or electric circuits.
Connect the ground clamp firmly to the
Â
welding bench or the workpiece.
Before start-up
01.10