Kärcher SC 1 PREMIUM Mode D'emploi page 10

Masquer les pouces Voir aussi pour SC 1 PREMIUM:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
hand from a close distance, and do
not direct it at people or animals.
Risk of scalding from high wa-
ter output if you tilt the device
due to more than 30° to the side
when using it.
es only
Risk of scalding on the hot
steam boiler. Allow the steam
boiler to cool down before filling
it with water.
Does not apply to SC 3
devices
Risk of scalding. Let the appli-
ance and accessory parts, par-
ticularly the floor cleaning cloth
and the hand cover cool down
before touching them.
scalding. Do not use the appli-
ance for cleaning pressure tanks
as this poses a bursting and ex-
plosion hazard.
ing from the floor nozzle. Ensure
that no part of the body gets un-
der the floor nozzle. Never oper-
ated the floor nozzle without
wearing shoes.
ing. Only operate the appliance
once it is fully assembled and
functional.
Risk of scalding. Let
the appliance cool down fully be-
fore putting it away.
connect accessories from the
device while steam is being ex-
pelled.
Hot water may drip out
when disconnecting accessory
parts. Allow the device to cool
down first.
Never open the
10
Applies to SC 1 devic-
Risk of
Risk of scald-
Risk of scald-
Never dis-
maintenance / safety lock during
operation. Allow the device to
cool down first. lDo not clamp
the steam lever / steam key dur-
ing operation.
aged steam hose immediately
with a steam hose as recom-
mended by the manufacturer.
Do not steam any objects which
contain harmful substances
(e.g. asbestos).
CAUTION
store the device in accordance
with the description or figure.
Check the device and the acces-
sories, in particular the power
supply cable, safety lock and
steam hose, to make sure it is in
proper safe and reliable condi-
tion before operation each time.
Do not use the device if it is
damaged. Replace damaged
components immediately.
switch on the device when water
is present in the steam boiler.
The device may otherwise over-
heat, see the Troubleshooting
chapter of the operating instruc-
tions.
Accidents or damage
due to the device falling over.
Before all actions with or on the
device, you must make sure that
it is stable.
ATTENTION
any cleaning agents or other
supplements.
the device at temperatures be-
low 0 °C.
vice unsupervised while it is
English
Replace a dam-
Only operate or
Do not fill with
Do not operate
Never leave the de-
Only

Publicité

Table des Matières
loading

Table des Matières