Use - Vortice CB LCD W Ariasalus Notice D'emploi Et D'entretien

ENGLISH

Use

N.B. The device controlled via panel operates continuously (use button
speed operation and display off).
Initial settings
Time adjustment
- Press the button
until starts flashing;
- repeatedly press buttons
to select the desired time the value is
stored automatically);
- premere to set the minutes: proceed
as above to select the minutes and the
day.
Temperature calibration
(NOTE: only if it's necessary to
calibrate the termperature sensor, e.g.
to match the value to that measured by
another device):
- Simultaneously press
about 2 seconds until the
starts flashing;
- Repeatedly press buttons
select the desired temperature (the
value is stored automatically after 6
seconds).
18
, for 2 seconds
3
and
4
e for
° C
icon
e to
to switch the device to minimum
MON TUE WED THU FRI SAT SUN
UV
SET
MON TUE WED THU FRI SAT SUN
UV
SET
°
°
°
C
AUTO
°
C
AUTO