Electrical Connections - Vortice CB LCD W Ariasalus Notice D'emploi Et D'entretien

ENGLISH
Factory default values reset
Press and simultaneously for
about 2 seconds until the light is
switched off, which means the system
has reset to factory default values.
Reset must be performed with the
device connected to the power supply.
Perform the reset procedure again if
the device is disconnected.

Electrical connections

Connections must
respecting the correspondence
between the colours of the
terminals and cables coming from
the device (fig.11).
Note: connections must be made
in accordance with the wiring diagram.
22
10
be made
MON TUE WED THU FRI SAT SUN
UV
SET
11
CB LCD W ARIASALUS
BU
N
B
U=blue
OG= orange VT= violet BK= black
BN= brown
°
C
AUTO
OG PK VT GY BK BN
R F L M H
PK= pink GY= grey
L