Hybrid Chmf150/200 As A Combination "Wood/Oil" Furnace - Continental HYBRID 150/200 Instructions D'installation Et D'opération

5.3

HYBRID CHMF150/200 AS A COMBINATION "WOOD/OIL" FURNACE

THE INSTALLATION OF THE WOOD OIL COMBINATION FURNACE MUST BE DONE IN ACCORDANCE
WITH THE RULES OF THE AUTHORITIES HAVING JURISDICTION AND THE CAN / CSA B139-09
REQUIRED COMPONENTS:
• CHMF150/200 Hybrid Furnace
• HMFK-BMP50-1 Blower Box Module
• HMFK-OFRF40 or HMFK-OFBNX Oil
Burner Module
STEPS #1 - #9
Follow Steps 1 to 9 from SECTION 5.2 - HYBRID CHMF150/200 AS A "STAND ALONE" WOOD FURNACE.
LEFT HAND RA
STEP #10
○ Remove the contents of the Oil Burner Module Kit (HMFK-OFRF40 or HMFK-OFBNX) and compare with
the contents list on the "Manual" Addendum accompanying the Oil Furnace Module.
STEP #11
○ Remove (6) hex head screws fastening the bot-
tom front panel to the front corner post and pull
the bottom front panel off CHMF150/200 furnace
assembly.
STANDARD FOR OIL BURNING HEATING APPLIANCES.
LEFT HAND RA
• HMFK-SOLID or HMFK-GLASS Door Kit
• HMFK-CMBCH-1 (CHMF150) or HMFK-CCH200
(CHMF200) Oil Combustion/Heat Exchanger
• HMFK-WMO WMO Thermal Safety Switch
RIGHT HAND RA
○ Remove the oil fl ue blanking plate off the rear
furnace panel (remove 8 hex screws from the
blanking plate).
LEFT HAND RA REAR VIEW
25
H3.43
W415-1506 / C / 02.15.18
EN