Mounting Primary Air Control - Continental HYBRID 150/200 Instructions D'installation Et D'opération

4.6

MOUNTING PRIMARY AIR CONTROL

IMPORTANT:
This step must follow the plenum installation in Section 6.0. The plenum is not shown in diagrams below, for
clarity purposes.
Location of the Primary Air Control in left and right RA.
LEFT HAND RA
1. Place the Shutter Assembly inside the Damper Slot.
2. Slide the rings on the Shutter Rod between Push Nuts.
SHUTTER ASSEMBLY
SHUTTER ROD
PUSH NUTS
13
RIGHT HAND RA
W415-1506 / C / 02.15.18
EN