Hydac HDA 5500 Notice D'utilisation page 42

HDA 5500 for HLB 1000 and CS 1000
Menu point Setting
Decimal place for display of temperature (dEc.T.)
Decimal place(s) when displaying measured values of
temperature
Lower display range of temperature (LOr.T.)
Lower limit of the display range
of temperature
Upper display range of temperature (Hir.T.)
Upper limit of the display range of
the temperature
Background lighting for the unit label for temperature
(uni.T.)
Allocation of the analogue output to signal (ouT.S)
Output signal (ouT.M)
Software version (VErS)
Displays the software version (for reference only)
To close basic settings (End)
Lighting behind unit label is switched on
Lighting behind unit label is switched on
the analogue output displays rel. change in
viscosity
the analogue output displays rel. change in
dielectric constant
the analogue output displays rel. humidity
the analogue output displays temperature
4..20 mA output signal
0..10 V output signal
Basic settings menu closes. Changed settings are
saved.
Basic settings can still be altered
Setting range Default setting
0 .. 0.000 0.0
-999..9899 -25.0
-899..9999 100.0
on oFF
oFF
r.ViS. r.ViS.
r.diE.
r.HuM.
TEMP.
MA VoLT
VoLT
YES no
no
- 11 -