Compliance With Rohs Directive; Package Information; Technical Data - Grundig MF 2000 BT Mode D'emploi

InFORMaTIOn
Compliance­with­the­Weee­Direc-
tive­and­Disposing­of­the­Waste­
Product:­
This product complies with EU WEEE Directive
(2012/19/EU). This product bears a classifica-
tion symbol for waste electrical and electronic
equipment (WEEE).
This symbol indicates that this product
shall not be disposed with other
household wastes at the end of its ser-
vice life. Used device must be re-
turned to offical collection point for
recycling of electrical and electronic devices. To
find these collection systems please contact to
your local authorities or retailer where the prod-
uct was puchased. Each household performs im-
portant role in recovering and recycling of old
appliance. Appropriate disposal of used appli-
ance helps prevent potential negative conse-
quences for the environment and human health.
Compliance­with­RoHS­Directive
The product you have purchased complies with
EU RoHS Directive (2011/65/EU). It does not
contain harmful and prohibited materials speci-
fied in the Directive.
Package­information
Packaging materials of the product
are manufactured from recyclable ma-
terials in accordance with our Na-
tional Environment Regulations. Do
not dispose of the packaging materials together
with the domestic or other wastes. Take them to
the packaging material collection points desig-
nated by the local authorities.
­ - -----------------------------------------------------------------------------------------------------------------
Technical­data
EU, 2009/125/ EC and 2011/65/EU.
You can find the CE declaration of conformity for
the device in the form of a pdf file on the Grundig
Homepage www.grundig.com/downloads/doc.
electrical earth.
The type plate is located on the rear of the hi-fi
system.
System
Power­supply
Operating voltage: 100 - 240 V ~
Mains frequency: 50/60 Hz
Rated power consumption: 25 W
Power consumption (ECO mode): ≤ 0.5 W
amplifier­unit­
Output:
Sine wave power: 2 x 20 W
Loudspeaker impedance: 6 Ω
Signal-to-noise ratio: ≥ 55 dBA
Receiver­unit
Reception range: FM: 87.5 ...108.0 MHz
BT MAX. Transmitted power: 13dBm
BT Frequency: 2402MHz – 2480MHz
BT Firmware version: 120201
BT Hardware version: V01A
CD­unit
Frequency response: 50 Hz ... 20 kHz
Noise voltage ratio: ≥ 60 dBA
This device is noise-suppressed
according to the applicable EU
directives. This product fulfils the
European directives 2014/53/
This equipment is a Class II or double
insulated electrical appliance. It has
been designed in such a way that it
does not require a safety connection to
ENGLISH
17­