General Functions; Switching On And Off; Automatic Switch-Off; Adjusting The Volume - Grundig MF 2000 BT Mode D'emploi

GeneRal­FUnCTIOnS
Switching­on­and­off
The only way to disconnect the hi-fi system from
the mains supply is to pull out the plug.
1
Switch on the hi-fi by pressing »
vice.
– The last input source used is automatically
selected.
note:
The hi-fi system can also be switched on by
7
pressing » « on the remote control.
2 Switch the hi-fi system to standby mode by
pressing » «.
automatic­switch-off
The device switches off automatically after 15
minutes in standby mode if:
– the device is in the stop position;
– there is no audio signal detected at the
»lIne­In« socket;
– the Bluetooth auxiliary devices is not sending
an audio signal.
To use the device, switch it back on.
adjusting­the­volume
1­Press » VOl­ «­on the hi-fi system or press »
VOl­
« on the remote control to change the
volume.
Muting
You can switch the hi-fi speakers to and from
mute mode with this function.
1
Activate mute with »
trol.
2 Deactivate mute with »
control.
12­
ENGLISH
« on the de-
« on the remote con-
« on the remote
­---------------------------------------------------------------------------------------