Operating Your Grill; Connecting & Disconnecting Lpg Cylinder - habitat et jardin Patio Mode D'emploi

Left Side
CAUTION:
Use only the regulator provided. If a replacement is necessary, call our customer service center. The
use of unauthorized parts can create an unsafe condition and environment.
Connecting & Disconnecting the LPG Cylinder
LPG gas Supply Connection & Disconnection
1. The hose should be secured to the regulator and the appliance with nut. This barbecue is set to operate a 28
mbar regulator with butane gas and a 37mbar regulator with LPG gas and a regulator with butane/propane
mixture at 37mbar and a regulator with butane/propane mixture at 50mbar and a regulator with butane/propane
mixture at 30mbar. Use a suitable regulator certified to BSEN 16129:2013. Please consult your LPG dealer for
information regarding a suitable regulator for the LPG cylinder.
2. Always place the LPG cylinder on the tank brackets located on the right side of the cart.
3. Always confirm all burner control knobs are in the OFF position before activating the gas supply.
4. Before connection, be sure that there is no debris caught in the head of the LPG cylinder, head of the regulator
valve, or in the head of the burner and burner ports.
5. Always connect the LPG gas supply regulators as follows: Insert the nipple of the valve coupling into the tank
valve and tighten the connection collar by turning it clockwise with one hand while holding the regulator with the
other hand.
6. Disconnect the LPG cylinder from the regulator valve when the grill is not in use.
7. Always confirm all burner control knobs are in the OFF position before disconnecting the LPG gas supply.
8. Before disconnecting, be sure that the tank valve is in OFF position.
9. Always disconnect the LPG gas supply regulators as follows: Loosen the connection collar by turning it
counter-clockwise with one hand while holding the regulator with the other hand and take the nipple of the valve
out of the tank valve. Do not obstruct the flow of combustion air and ventilation air to the grill.
10. Keep ventilation openings of the cylinder enclosure free and clear from debris.
11. Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Install only the type of dust cap on
cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage
of LPG gas.
12. The maximum diameter and the maximum height of the suitable gas cylinder are 320 mm and 570 mm.
13. Turn off the gas supply at the LPG cylinder after use.
14. LPG cylinder: a common camping LPG cylinder with a fill weight of 3,5 or 11 kg(e.g. grey camping LPG
cylinder). These are available at DIY shops or LPG gas suppliers.
Fully Assembled View

Operating Your Grill

39
Right Side