habitat et jardin Patio Mode D'emploi page 38

Step 11
a. Take the washer and nut off from the thermometer (B).
b. Put the thermometer (B) through the hole of the lid, seal with the washer and nut which you take off just now.
c. Make sure the indicated scale is right to your direction, lock the thermometer (B) tightly.
Step 12
a) Insert the pre-assembled bolt on the lid handle to the hole of the lid, seal with washer (EE) and M6 nut (FF).
b) Screw them tightly. (As the below fig)
35