Step 5
a.
Align the hole on the Bottom Right Hinge (P) with the corresponding hole on the Fire Bowl (G).
b.
Screw 2pcs M4x12 bolt (BB) to the rivet nut along with washer (EE) and lock each by 1pc M4 nut (DD). Tighten
by screwdriver.
c.
Do it again with the Bottom Left Hinge (O).
Note: The Bottom Hinges are different from the Up Hinges, the support part of Bottom Hinge is folded outside, while
the Up Hinge is folded inside.
Step 6
a) Align the hole on the Burner Support (Q) with the hole on the Fire Bowl (G).
b) Insert 4pcs M4x12 Bolts (BB) to the rivet nuts separately. Screw them tightly.
32