Parkside PSA 25 B1 Mode D'emploi Rapide page 14

playing or swallow parts and
suffocate.
Make sure that you do not
damage any power lines during
installation.
Never aim the water jet at
electrical equipment.
Never aim the water jet at
people or animals.
Make sure that all parts are
undamaged and correctly
assembled.
Regularly check the water pres-
sure to prevent water leaking
under high pressure and causing
injury. Do not aim the water jet
at people or animals.
Never drink the water that
you transport with the
product. The product is not
suitable for potable water.
The product is intended for
carrying water from in-
stallations in fixed loca-
tions. You cannot use it to
transport other liquids.
Only lay the unravelled hose flat
on the ground. Avoid loops which
stand up. Loops are trip hazards
and can cause accidents.
Do not leave the hose to re-ravel
itself. Carefully guide it back into
the housing.
14 GB/IE
Do not let go of the hose unless
the automatic stop function is
engaged.
Danger of slipping! When
the ground is wet, you can easily
slip on the ground and injure
yourself. Ensure that the ground
near the product is kept as dry
as possible.
Turn the tap off when the
product is not in use.
Make sure that you do not dam-
age any cables, power lines and
water pipes during installation.
Check the installation area with
a cable detector before drilling.
To avoid frost damage, take the
product off the wall in winter and
store it dry.
Do not take the hose around
corners or edges and do not
move it along pointed or sharp-
edged objects. The resulting
damage may lead to leakages.
Do not put the hose in areas
where vehicles are known to
drive. Driving over the hose may
cause it to split.
Do not open the housing of the
product. The springs are pre-
loaded, they can spring back.
Never remove any screws from
parts of the housing.