HoMedics DEEP SLEEP RENEWAL Manuel D'instructions page 17

INSTRUCTIONS FOR USE
1. Unpack the product and check to make sure the
adaptor and remote control are included. (Fig. 2)
2. This unit is powered by an AC adaptor.
3. Attach the AC adaptor jack to the base of the unit
and insert the cord into a 120V household outlet.
Remote Control Battery Precautions
• Use only the size and type of batteries specified.
• When installing batteries, observe proper +/–
polarities. Incorrect installation of battery may
ol
cause damage to the unit.
• Clean the battery contacts and also those of the
device prior to battery installation.
How to mask distractions all night
Your Deep Sleep unit is powerful enough to be used
anywhere in the room and placing the unit away
from your beside will fill the room with soothing
sound selections- ranging from pure white noise to
incredible nature sounds- and will mask all external
distractions. If you wish to help drown out sounds
located within the bedroom (like a snoring partner),
place your Deep Sleep unit directly at your bedside -
preferably on a nightstand - and position the speaker
toward you.
How to use your deep sleep
Once you have decided where to place your Deep
Sleep for optimal results, follow these steps to create
your perfect sleep environment.
1. Press the POWER button (Fig 1)
2. Choose your optimal sleep setting. As you scroll
through the categories listed below, your sound
selection will illuminate on the LCD screen. We
have four categories to choose from:
White Noise: By gently tapping the "White
Noise" touch button on your unit, you can scroll
through the different White Noise tones: Soothe,
Mask, Relax and Calm. Take a moment to listen
to each tone and decide which one best suits your
environment.
Water: Tap on the "Water" button to scroll
through our 4 Water relaxation selections: Ocean,
Brook, Thunderstorm and Rain
Nature: Tap on the "Nature" button to scroll
through the Nature sound relaxation selections:
Summer Night, Campfire, Wind Chimes and
Everglades
Sleep Therapy: Our Sleep Therapy programs are
unlike any other sleep-inducing sound programs.
These programs are designed to combine the
relaxation benefits of Relaxation sounds with the
noise-blocking capabilities of the White Noise
tones.
How to Enjoy Sleep Therapy
Tap on the Sleep Therapy touch button and scroll
through any one of our 8 Water or Nature relaxation
tones. Choose the tone you wish to relax to as you
fall asleep. Once you are asleep, your Relaxation tone
will gently transition to a White Noise tone to keep
you in the deepest sleep imaginable- all night long.
NOTE: Sleep Therapy is designed to run all night,
until you wake fully refreshed in the morning
Therefore, you cannot use Sleep Therapy with the
Timer Mode.
3. Once you select the White Noise, Water, Nature
or Sleep Therapy tone that is suits your needs,
you can adjust the sound by pressing the TONE
button (Fig 1) up and down. Press and hold the
"+" symbol to remove bass and achieve a higher
pitch. Press and hold the "-" symbol to add bass
and achieve a lower pitch.
4. Finally, to adjust the VOLUME, press and hold the
"+" or "-" symbols on the VOL button (Fig 1).
Your Deep Sleep unit is now set. When you wake in
the morning and power off the unit- don't fret. You
will not have to reset your choices. Your Deep Sleep
is programmed to remember your settings when
you power the unit back on. If you choose to try a
different sleep setting, just repeat steps 1-4.
17 I GB