Bergstrom TRR COMPACT N&D Manuel De L'utilisateur page 12

COMPACT N&D
EN
How to activate remote control:
In order to activate remote control, while equipment is switched off, push key
control panel until C
on in the remote control. You will have to do it within 30 seconds or else you will have to
repeat the whole operation.
How to deactivate remote control:
In order to deactivate remote control, push key
display. Once it stops flashing, push key
seconds or else you will have to repeat the whole operation.
• In order to clean the condenser or the drainage valves (*) it is necessary to take
down the top plastic cover of the unit (7 tapping screws) and blow the condenser
with compressed air; the drainage valves must be taken down and cleaned inside.
We recommend entrusting this operation to a technical service authorised by Dirna
Bergstrom.
*
flashes on display. When it stops flashing, push the On/off key
12
-
of control panel until C , flashes on
+ on panel. You will have to do it within 30
-
from