Drive System - Sears C950-52943-0 Manuel D'utilisation

ENGINE:
Brand
Model Series
Gross Torque*
Type
Displacement
Starting System
Alternator
Spark Plug Gap
Spark Plug
Long Life Platinum Spark Plug
Oil Capacity
Hydraulic Fluid
Fuel Tank Volume
Ignition System
AUGER/IMPELLER:
Clearing Width
Intake Height
Auger/Impeller Diameter
Number of Impeller Blades
CHUTE:
Chute Deflector
Chute Rotation

DRIVE SYSTEM:

Drive Type
Drive Speeds
Tire Size
Tire Inflation
Engine Power Rating Information
*The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers) code
J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with
SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are derived at 3600 RPM. Actual gross en-
gine power will be lower and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given
both the wide array of products on which engines are placed and the variety of environmental issues applicable to operating the equip-
ment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (actual "on-site" or net
power). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, car-
buretor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine
variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this
Series engine.
Briggs & Stratton
Snow Series
13.50 T.P. @ 3060 rpm
4-Cycle - OHV
18.6 cu in. (305 cc)
110V Electric, Recoil
60W AC
0.030 in. (0,76 mm)
481055
5066
28 oz (0,83 liters)
Mineral 5W30
3.0 qts (2,8 liters)
This spark ignition system complies with Canadian standard ICES-002.
27 in. (68,6 cm)
21 in. (53,3 cm)
12 in. (30,5 cm)
3
Manual
Left Side Crank - 190° (3.5 Turn)
Friction Disc - Traction Lock Pin
6 Forward Speeds, 2 Reverse
16 x 4.8 in. (41 x 12,2 cm)
14 psi (0,96 bar)
37
SPECIFICATIONS