Red Sea ReefDose Notice D'utilisation page 16

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Red Sea ReefDose
®
Initial settings
The AP name of each ReefDose is the default name for the device in the App. However, you can set a new
name during the on-boarding or at a later time using the "Rename" function from the Device Manager.
Once ReefDose is successfully on-boarded to ReefBeat you are asked to set a few Device Settings and
notification settings for your ReefDose, all of which may be changed in the future from the 3-dots menu of
the Dashboard.
1. Device Settings
• "Supplement Volume Monitor": enter the number of days for receiving low supplement notification.
Default is set at 3 days.
• "Delay Between Heads": select a time gap between dosing of different heads, to prevent unwanted
chemical interactions. Minimum setting is 15 seconds (default), maximum is 5 minutes.
These settings can be edited at any time from: Dashboard > 3dots menu > Device Settings
2. Notifications Setup
Select which notifications you would like to receive to your mobile when the App is closed.
• "Head malfunction": receive a notification if a head is missing or not attached properly during a
scheduled dose.
• "Missed dose": receive a notification at 12:00 if scheduled doses from the previous day were not
compensated and you have not yet opened the App to see the automated pop-up.
• "Stock Level Monitor": receive a notification when supplements need to be replenished.
These settings can be edited at any time from: Homepage > 3dots menu > Notification Settings
Note: Each head needs to be set up individually before it can be programmed with an automated
schedule or give a manual dose. See the "Head Settings" section below.
16

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Reefdose 2Reefdose 4

Table des Matières