Turbo Brush; Accessories - domoova DBV60 Mode D'emploi

EN
Maintenance
Cyclone and filters
To clean the cyclone and filters, remove the dust bin as indicated in
the "Dust bin" section above.
Lift the main filter and unlatch the cone-shaped filter (see the Filters
diagram on page 5). Shake them outdoors to remove the built-up
dust particles, then rinse them under clean water.
Clean the walls and bottom of the cyclone using a soft, dry cloth to
remove all of the dust.
NOTE: Make sure the filters are completely dry before reinserting them into the
cyclone.

Turbo brush

Please make sure to clean the brush regularly for optimum
performance.
Release the latch under the Turbo brush, then remove the rotating
brush (see the Turbo brush diagram on page 6).
Remove debris (hair, dust) buildup on the brush and reattach the
brush. Make sure you reposition the release latch correctly.
NOTE: To reattach the brush, first insert the right side into the notches and then the
left side.

Accessories

Regularly check and clean the 2-in-1 nozzle to maintain optimum
performance.
13