Turbo Brush - domoova DHV51 Manuel D'utilisation

Table des Matières

Les langues disponibles

Maintenance

Turbo brush

Electric rotating brush

Please make sure to clean the brush regularly for optimum

performance.

Figure 1

Release the latch on the underside of the Turbo brush (Figure 1)

then remove the brush (Figure 2).

Remove debris (hair, dust) buildup on the brush and reattach the

brush. Make sure you reposition the release latch correctly.

Castor

Check that the castor under the Turbo brush is clean. Dust particles

can accumulate and prevent the Turbo brush from functioning

correctly.

NOTES:

•

To reattach the brush, first insert the left side into the notches and then the

right side.

•

To remove the Turbo brush castor, take a small slotted screwdriver and gently

dislodge the castor's fixing rod. Remove any debris and reattach the castor.

Figure 2

Table des Matières

Table des Matières