Maintenance; Turbo Brush, Soft Active Brush And Hard Active Brush; Suction Tubes - domoova DHV41 Manuel D'utilisation

Maintenance

• When inserting the cyclone system into the
• dust bin, make sure the check valve is in line with the dirt tube.
• Check the locking instructions on the top to reposition the HEPA filter.

Turbo brush, Soft Active Brush and Hard Active Brush

Please make sure to clean the brushes regularly for optimum
performance.
Release the latch under the holder, then remove the rotating cylinder
brush (see the Turbo brush or Active Brushes diagram on page 6 and
8).
Remove debris (hair, dust) buildup on the brush and reattach the
brush. Make sure you reposition the release latch correctly.
NOTE: To reattach the brush, first insert the left side into the notches and then the
right side.

Suction tubes

Rigid tube
Regularly check that the cleaning wand is not blocked by dust buildup
or other debris.
Hose (optional)
Check that the hose is not blocked by dust buildup or other debris.
13
EN