EN
Operating the vacuum
Handheld vacuum
Figure 1
Remove the handheld vacuum
from the vacuum chassis by
pressing the release button (see
the whole vacuum diagram on
page 4).
When you are using the appliance
as a handheld vacuum (Figure 1),
you can attach the 2-in-1 nozzle
accessory (Figure 2).
NOTES:
•
Regularly check the state of the
Turbo brush and 2-in-1 nozzle
to prevent them from damaging
flooring and furniture.
•
Remove the 2-in-1 nozzle before
you reattach the handheld vacuum
to the vacuum chassis. The 2-in-1
accessory can be stored on the back
of the stick vacuum (Figure 3)
Figure 2
Figure 3
10