Operating the vacuum
Charging the battery
Figure 1
Connect
the
elements (Figure 1) and plug the
power cable into a power outlet
(Figure 2).
Place the charging dock on
a level surface and position
the stick vacuum on top of it
(Figure 3). Make sure the dock's
charging poles are lined up with
the appliance. The appliance can
only be charged on the charging
dock in stick vacuum mode.
The indicator lights on the
handheld vacuum will start to
flash when the appliance is being
charged. When the battery is
charged, the indicator lights will
light up continuously for several
seconds and then turn off.
charging
dock
Figure 2
Figure 3
7
EN