Inspection Equipment Monitoring; Troubleshooting; Service; Spare Parts And Accessories - MACHEREY-NAGEL PF-3 Manuel

10. Inspection equipment monitoring

The photometric accuracy of the PF-3 can be tested with the
colored NANOCHECK solutions (REF 925 701), provided by
MACHEREY-NAGEL. The appropriate evaluation sheet can be
downloaded on our homepage www.mn-net.com.

11. Troubleshooting

Error message
Display stays dark
Instrument is turned
on but doesn't react

12. Service

12.1. Spare parts and accessories

Description
Robust case with foam inlay,
for PF-3, accessories and VISOCOLOR
Calibration tube
USB cable for data export and power supply
Optional accu pack
Measurement tubes (20)
Manual
VISOCOLOR
®

12.2. Disposal

In compliance with local and national legal regulations (EU Direc-
tive 2002/96/CE), the MACHEREY-NAGEL company disposes old
instruments free of charge.
Note: With effect from August 2005, disposal using public waste dis-
posal facilities is no longer permitted. In the case of disposal, please
contact your MACHEREY-NAGEL representative

12.3. Warranty

The guarantee period is 24 months. The original commercial invoice
serves as the guarantee card and must be presented in case of a
claim during the given period. The guarantee is not valid in cases of
improper handling and the guarantee does not cover defects caused
by the external power supply. The guarantee is limited to repairs of
defective parts or, in our sole discretion, replacement with a brand
new and defect-free instrument. Any guarantee claims made or al-
leged do not influence the total guarantee period of 24 months. The
right of withdrawal does not exist. Further claims are excluded and
Manual PF-3 02.14
MN
Reason
• No power supply
• Instrument is
frozen
test instructions for PF-3
Solution
• Check if batteries are
inserted or if USB cable is
connected
• Turn off instrument, wait 10 s,
turn on instrument again
® test kits
Manual PF-3
REF
934 102
916 908
919 390
919 391
916 80
919 392
934 001
27