COZY W255GPPR Instructions D'installation Et D'utilisation page 18

WARNING: Please Use Caution While Installing the Electrical Connection
FOLLOW THIS STEP IF THE PILOT PRO
IS ON THE RIGHT SIDE OF THE HOUSING.
(Proceed to step 7-B if the Pilot Pro is on the left side of the housing).
Make certain wiring connections are tight before proceeding and secure so they
will not be able to contact high temperature locations.
STEP 7-A.
A. Route the wires around the back edge & inside the heater
A
housing. Bundle wires neatly with a cable tie (48) attached to
the Z-shaped bracket inside the liner.
B. Bundle the wires against the valve bracket. Fix the wires in
B
place neatly by attaching them with a cable tie (48) to the valve
bracket (50).
Do not allow the bundled wires to hang beyond the edge of the
valve bracket (C) and keep the bundled wires below the lower
part of the burner (D).
NOTE: Keep all wires away from the burner.
ELECTRICAL CONNECTION
D
50
B
48
Page 18
50
48
C
48
50
48
A
...continue to page 20.
1018454-E