INSTALLATION
STEP 13.
Direct the control module wires (29)
through the small notch on the side of the
mounting plate (30).
29
Tuck the wires
around the
edge of the
heater
housing,
against the
29
wall, and
30
inside the
heater.
30
On the inside of the heater, you will
see orange and black wires extending
40
from the burner.
42
Lead the orange pilot ignitor wire (40)
and black flame sensor wire (42) out
of the heater beside the wires you
have just directed in.
42
40
Page 13
1018454-E