COZY W255GPPR Instructions D'installation Et D'utilisation page 15

WARNING: Please Use Caution While Installing the Electrical Connection
STEP 3.
29
Run a cable tie (48) through the
small hole beside the notch on the
mounting plate (30).
Gather all the wires from the control
module (29) with the cable tie (48).
Guide any excess wire length
back into the heater.
STEP 4.
- Connect Black TP wire to the
TP terminal of valve.
- Connect Green TH wire to TH terminal
of the valve.
- Connect Orange THTP wire to the
THTP terminal of the valve.
NOTE: Ensure that all of the
connections are tightened firmly.
ELECTRICAL CONNECTION
48
30
Page 15
PILOT
ADJ
TH
black wire
TP
THTP
1018454-E