Electromagnetic Fields (Emf); Charging; Preparing For Use; Preparing Treatment Areas - Philips SC2001/01 Mode D'emploi

EngliSh
12
4203.000.6357.3.indd 12
An integrated optical filter makes sure no UV light reaches the skin and
therefore leaves it unharmed.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic
fields (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientific evidence
available today.

Charging

Fully charge the batteries before you use the appliance for the first time
and when the batteries are empty. Fully charging the batteries takes up to
1.5 hours.
Charge the appliance when the charging light lights up orange during use to
indicate that the battery is low. When this happens, the remaining capacity
is at least 30 flashes.
Fully charged batteries provide at least 150 flashes at light intensity 5, which
amounts to approx. 15 minutes of cordless operation time.
Fully charge the appliance every 3 to 4 months, even if you do not use the
appliance for a longer time.
Charge the appliance in the following way:
1 Switch off the appliance.
2 Insert the small plug into the appliance and put the adapter in the
wall socket.
The charging light flashes green to indicate that the appliance is
,
charging.
When the batteries are fully charged, the charging light
,
lights up green continuously.
Notes:
- The adapter feels warm during charging. This is normal.
- You cannot use the appliance during charging.
.
- This appliance is equipped with battery overheat protection and does
not charge if the room temperature exceeds 40°C.
Never cover the appliance and adapter during charging.
3 After charging, remove the adapter from the wall socket and pull the
small plug out of the appliance.

preparing for use

For optimal results and highest efficacy, prepare the areas on which you
intend to use the appliance in the manner described below.

preparing treatment areas

1 Shave the areas you intend to treat as long as you still experience
hair regrowth.
Note: If your last depilation method involved removing hairs by the roots (e.g
epilating, waxing etc.), wait until you notice significant hair regrowth before
you use Philips Lumea . Make sure you shave the area before you use Philips
Lumea. Shaving is necessary to ensure that the light energy is channelled to
the hair root in the most efficient way.
27-04-10 15:00