SEVERIN MW 7870 Mode D'emploi page 20

Masquer les pouces Voir aussi pour MW 7870:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25
Note: If the door is not opened immediately after the pre-programmed operating time has elapsed, a 4-beep signal is heard every 2
minutes.
Note: The following steps are used for setting the cooking time:
0 – 5 minutes
: 10-second steps
5 – 10 minutes
: 30-second steps
10 – 30 minutes
:
30 – 95 minutes
:
Clock
:
Once the unit has been connected to the power supply, the display shows ‚1:00' and an acoustic signal is heard.
1.
Press
once or twice to select the 12 or 24 hour display format. The display shows Hr 24 or Hr 12.
2.
Turn the rotary control
3.
Press
. The minute digits are shown.
4.
Turn the rotary control
5.
Press
to fi nish setting the time.
The symbol ‚:' fl ashes and the correct time is shown.
The time setting process can be cancelled by pressing the
The clock must be set when the appliance is connected for the fi rst time, and also if a power failure has reset the clock.
Quick-programming
:
The most commonly used microwave time-settings can be called up simply by pressing the rotary control
the microwave power setting is always 100%. Each press on the rotary control adds 30 seconds to the cooking time. The maximum
pre-programmable time is 10 minutes.
Note: the cooking process starts as soon as the rotary control is pressed.
Example: to programme the microwave function for a cooking time of 2 minutes at 100% power.
Press the rotary control
The microwave function
To programme the unit for cooking, the correct mode (microwave), the required power setting and the cooking time must be selected,
before the programme sequence can be started. The power setting is selected by repeatedly pressing
pre-set to a maximum of 95 minutes.
Power (P)
1 x
800 W
2 x
720 W
3 x
640 W
4 x
560 W
5 x
480 W
6 x
400 W
7 x
320 W
8 x
240 W
9 x
160 W
10 x
80 W
11 x
Example: to programme the microwave function for a cooking time of 5 minutes at 50% power.
1.
Press
6 times. The display shows 50%.
2.
Turn the rotary control
3.
Press the rotary control
20
1-minute steps
5-minute steps
to set the correct hour value.
to set the correct minutes.
4 times. The display shows 2:00 and the microwave operation starts.
:
Power settings
Display
100 %
90 %
80 %
70 %
60 %
50 %
40 %
30 %
20 %
10 %
0 %
until the display shows 5:00.
to start the programme.
key.
Type
High
Heating up liquids, cooking
Medium high
Defrosting and heating up deep-frozen dishes
Medium
Cooking delicate food
Defrosting
Defrosting food
Defrosting
Defrosting sensitive food.
No microwave function, cooling fan only
. With this function,
. The cooking time can be

Publicité

Table des Matières
loading

Table des Matières