Corsair K70 RGB MK.2 Mode D'emploi page 3

1
SETTING UP YOUR KEYBOARD
> Turn on your computer.
> Connect the keyboard connector to one USB 3.0 port.
> To take advantage of USB 2.0 pass-through port on the keyboard, please connect the keyboard's
USB pass-through connector to one USB 2.0/3.0 port.
> Download the iCUE software from www.corsair.com/downloads.
> Run the installer program.
> Follow the instructions for installation.
Note: For use only with Nationally Recognized Testing Laboratory listed end product and USB output
rated 5Vdc 900 mA.
HARDWARE PLAYBACK
The 8MB of onboard memory allocated for up to three profiles stores complex actions or custom
lighting which can be executed without additional software. Complex macros or key remaps as well as
custom lighting effects can be created and saved back to onboard storage using iCUE software. Use
Profile Switch key to cycle through saved onboard profiles.
PROFILE #1
SPIRAL RAINBOW
PROFILE #2 PROFILE #3
RAIN RAINBOW WAVE
GETTING TO KNOW YOUR KEYBOARD
B
A C
J
A — PROFILE SWITCH KEY
B — BACKLIGHT BRIGHTNESS KEY
C — WINDOWS KEY DISABLE
D — NUM LOCK LED INDICATOR
E — CAPS LOCK LED INDICATOR
F — SCROLL LOCK LED INDICATOR
E
D F G H
I
K L
G — MUTE KEY
H — VOLUME ROLLER
I — DEDICATED MULTIMEDIA KEYS
J — USB 2.0 PASS-THROUGH PORT
K — USB KEYBOARD CONNECTOR
L — USB PASS-THROUGH CONNECTOR
2