Olympus CAMEDIA C-2020ZOOM Mode D'emploi page 18

Picture effects
Press the Menu button, then press the top/bottom arrows on the Jog dial to
select FUNCTION. Press the right arrow on the Jog dial, then press the
top/bottom arrows to select the desired picture effect. Press the left arrow on
the Jog dial to confirm the setting. If you take a picture without pressing the
OK button, the setting will be valid until the Menu is canceled.
Sharpness
Press the Menu button, then press the top/bottom arrows on the Jog dial to
select MODE SETUP and press the right arrow. Press the OK button. Press
the top/bottom arrows to select , press the right arrow and top/bottom
arrows to make the selection. Press the left arrow to confirm the setting.
Press the OK button twice.
Meters/Feet selection
Press the Menu button, then press the top/bottom arrows on the Jog dial to
select MODE SETUP and press the right arrow. Press the OK button. Press
the top/bottom arrows to select m/ft, press the right arrow and top/bottom
arrows to make the selection. Press the left arrow to confirm the setting.
Press the OK button twice.
Using the flash
Flash working range:
Wide-angle Telephoto
Approx. 0.8 ~ 5.6 m Approx. 0.2 ~ 3.8 m
Auto-flash
In the Auto-Flash mode, the flash will fire automatically in low-light and
backlight conditions. When you take a picture that is backlit, position the
subject within the backlighting correction marks to fire the flash.
Red-eye reducing flash
This mode significantly reduces the phenomenon of "red-eye".
Fill-in flash (forced activation)
In the Fill-In Flash mode, the flash fires regardless of available light. For
example, this mode can be used to brighten up the subject's shaded face.
Another use of this mode is to correct the color shift produced by artificial
lights (eg. fluorescent light).
Off (flash override)
In the Off mode, the flash does not fire even in low-light conditions. Use this
mode in situations where flash photography is not desired or is prohibited, or
in twilight/night scenes.
18