Special Instructions - Bodum CHAMBORD 11076-16 Mode D'emploi

While the appliance is in use, the mains plug must be
accessible in case of an emergency. The manufacturer
declines any liability for accidents caused by faulty or non-
xisting earthing of the appliance.
– If the power point is unsuitable for accommodating the
plug of your appliance, have the power point changed by
a licensed electrician.
SAVE THESE INSTRUCTIONS
PARTS OF THE KETTLE
1 Hinged lid
2 Scale filter
3 Water level gauge
4 Max water level indicator
5 Min water level indicator
6 Base unit
7 ON/OFF button
8 Temperature selection knob
9 Keep warm button

SPECIAL INSTRUCTIONS

POWER-SUPPLY CORD
– A short power-supply cord is to be provided to reduce
risks resulting from becoming entangled in or tripping
over a longer cord.
– Extension cords are available and may be used if care is
exercised in their use.
– If an extension cord is used, the marked electrical rating
of the extension cord should be at least as great as the
electrical rating of the appliance, if the appliance is of the
grounded type, the extension cord should be grounding -
type 3-wire cord. The longer cord should be arranged so
that it will not drape over the counter top or table top
where it can be pulled on by children or tripped over.
SWITCHING OFF THE KETTLE MANUALLY
The ON/OFF button (7) can be used to switch the kettle off
before the water has reached the required temperature.
SAFETY CUT-OFF
The kettle is protected against damage resulting from use
with an insufficient volume of water. A safety cut-off will
automatically disconnect the power supply if the heating
element overheats. Should the kettle ever boil dry during
operation, you must leave it to cool for 10 minutes before
re-filling it with cold water. The safety cut-off will reset
automatically once it has cooled.
4