12/24 Hour Time Display Setting - La Crosse Technology WS-9626U-IT Manuel D'instructions

3. Confirm with the SET key and enter the "12/24-Hour Display setting" or exit the setting mode
by pressing the CH key.
Note:
If the Time Reception function is turned OFF manually, the clock will not attempt any reception
of the Atomic auto-set time (WWVB time) as long as the Time Reception OFF function is
activated. The Time Reception icon will not be displayed on the LCD.

12/24 HOUR TIME DISPLAY SETTING

1. After setting time reception ON/OFF, press the SET key, "12h" or "24h" flashes in the LCD.
(default 12 h)
2. Press the + key to select the "12h" or "24h" display mode.
flashing
26