La Crosse Technology WS-9626U-IT Manuel D'instructions page 31

3. The month digit will be flashing. Press the + key to set the month and then press the SET key to
go to the date setting.
4. The date digit will be flashing. Press the + key to set the date.
5. Confirm with the SET key and enter the "°C/°F TEMPERATURE UNIT SETTING" or exit the
setting mode by pressing the CH key.
°C/°F TEMPERATURE UNIT SETTING
The default temperature reading is set to °F (degree Fahrenheit Celsius). To select °C (degree
Celsius):
1. The "°C/ °F" will be flashing, use the + key to toggle between "°C" and "°F".
flashing
30