Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
To set the clock:
1.
The hour and minute digits start flashing in the time display section.
2.
Use the + key to adjust the hours and then press SET key to go to the minute setting.
3.
The minute will be flashing. Press the + key to just the minutes.
4.
Confirm with the SET key and enter the "Calendar Setting" or exit the setting mode by pressing
the CH key
Note:
The unit will still try to receive the signal at each full hour despite it being manually set. When it does
receive the signal, it will change the manually set time into the received time.
CALENDAR SETTING
Year
28
Publicité
Chapitres
Table des Matières
