Manual Time Setting - La Crosse Technology WS7034UITCA Manuel D'instructions

MANUAL TIME SETTING

User shall follow the below procedures to set the time manually.
Hours (flashing)
1. The hour digits start flashing in the time display section.
2. Use the MIN/MAX/ RESET/+ key to adjust the hours and then press SET/CH key to go to the
minute setting.
3. The minute will be flashing. Press the MIN/MAX/ RESET/+ key to just the minutes.
4. Confirm with the SET/CH key and exit the setting mode.
Note:
The time format is fixed to "12-hr" time display. "PM" will appear on the time LCD between the hours of
noon and midnight.
All manuals and user guides at all-guides.com
12
Minutes (flashing)