Initial Operation - Storch 570350 Traduction Des Instructions D'origine

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 42
If battery fluid does leak and comes into contact with your skin, rinse it off
with plenty of water immediately. If you get battery fluid in your eye, wash it
out using clean water and seek medical attention immediately!
Do not continue to charge fully charged battery packs! Overcharging causes
damage and reduce the battery pack's service life!
Only use the charger indoors!
Protect your charger from moisture!
Never let children use the appliance.
Children should be supervised to ensure that they do not play with the applian-
ce.
Keep children away from the charger and from the work area! Keep the charger
in a safe place so that it is inaccessible to children!
Immediately remove the power plug if smoke or fire is detected in the charger!
Do not use faulty battery packs!
Do not insert objects into the ventilation slots of the charger
- Risk of an electric shock or short circuit!
Do not charge battery packs with AIR COOLED chargers in areas containing a
lot of metal dust.

Initial operation

Before the initial operation, compare whether the mains voltage and
mains frequency specified on the nameplate conforms with the data for your
power supply. Appliance such as this one which generate direct current could
influence simple fault-current circuit breakers. Use type F or better, with a trip
current of max. 30 mA.
Before putting the charger into operation, make sure that the ventilation slots
are clear. Minimum distance to other objects min. 5 cm!
Self-test
Plug the mains plug back in. The warning indicator (4) and the operation indi-
cator (3) light up one after the other for approx. 1 second. The built in fan will
run for 5 seconds.
Translation of the original instruction
96

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

10,8 v

Table des Matières