Storch 570350 Traduction Des Instructions D'origine page 85

with your machine.
Make sure that there are not any power, water or gas lines in the place you
want to work on (e.g. using a metal detector).
When sawing water pipes, make sure they do not contain any water.
Wear hearing protection when working for a longer period of time. Prolonged
exposure to high noise levels can lead to hearing damage.
WARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:
- Lead from lead-based paints,
- Crystalline silica from bricks and cement and other masonry products, and
- Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well ven-
tilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles. This also
applies to dust from other materials such as some timber types (like oak or
beech dust), metals, asbestos. Other known diseases are e.g. allergic reac-
tions, respiratory diseases. Do not let dust enter the body. Observe the rele-
vant guidelines and national regulations for your material, staff, application
and place of application (e.g. occupational health and safety regulations, dis-
posal). Collect the particles generated at the source, avoid deposits in the sur-
rounding area. Use suitable accessories for special work. In this way, fewer
particles enter the environment in an uncontrolled manner. Use a suitable
extraction unit. Reduce dust exposure with the following measures:
- do not direct the escaping particles and the exhaust air stream at yourself or
nearby persons or on dust deposits,
- use an extraction unit and/or air purifiers,
- ensure good ventilation of the workplace and keep clean using a vacuum
cleaner. Sweeping or blowing stirs up dust.
- Vacuum or wash the protective clothing. Do not blow, beat or brush.
Observe the valid regulations in your country for the materials you are working
with. Do not try to saw extremely small parts. Clamp the part well. Do not,
under any circumstance, support the part using your hand or foot.
Use only sharp, undamaged saw blades. Do not use saw blades that are cra-
cked or ones whose form has changed.
Only use the machine with the limit stop fitted. The limit stop must be secure
ly place on the part when sawing.
85 Translation of the original instruction