Comunello Automation FORT 400 One Instructions D'utilisation Et D'installation page 32

• Rotate the key in a clockwise direction by 90°. Grab the release lever and pull it in a counter-clockwise direction until it stops (FIG.17). This will
make the pinion idle, thus allowing the gate to be manually opened (FIG.17).
• Do not exert excessive force on the door of the gate, but rather guide it along its stroke. (FIG. 18).
FIG. 17
• The key cannot be removed from the lock until the lever is returned to the initial position.
• To reset the motorised command, shift the lever into the initial closure position (FIG. 19)
• Remove the key and store it somewhere safe and known to all interested parties (FIG. 20).
FIG. 19
2
• Close the front hatch (FIG. 21).
FIG. 21
32 COMUNELLO ®Copyright 2020 - All rights reserved
1
FIG. 18
FIG. 20