Dust/Chip Extraction - BTI WKS 17-125X RE X-LOCK Notice D'utilisation D'origine

(3)
After fitting, check that the edge of the abras-
u
ive tool (➍) is fitted correctly, i.e. is no higher
than the reference surface (➎). If the edge is
higher than the reference surface, either the
holder must be cleaned or the abrasive tool
must not be used.
Before removing the grinding/cutting/flap disc:
Make sure that the power tool has come to a com-
plete stop.
Removing the abrasive tool
➊ Open the lever (3).
➋ The grinding/cutting/flap disc will be re-
leased.
➌ The grinding/cutting/flap disc can be re-
moved.
(3)
Cup brushes/disc brushes and fibre discs
Always fit the hand guard (14) when working
u
with the cup brush/disc brush or fibre disc.
See the graphics page for fitting instructions.
To remove an application tool, open the lever (3)
and remove the application tool.
44 | English
Approved abrasive tools
You can use all the abrasive tools mentioned in
these operating instructions.
The permissible speed [rpm] or the circumferen-
tial speed [m/s] of the abrasive tools used must at
least match the values given in the table.
It is therefore important to observe the permiss-
ible rotational/circumferential speed on the label
of the abrasive tool.
Rotating the machine head
u
English
the four screws. Rotate the machine head care-
fully, without removing it from the housing, into
the new position. Screw in and retighten the four
screws.
(3)

Dust/Chip Extraction

The dust from materials such as lead paint, some
English
types of wood, minerals and metal can be harmful
to human health. Touching or breathing in this
dust can trigger allergic reactions and/or cause
respiratory illnesses in the user or in people in the
near vicinity.
Certain dusts, such as oak or beech dust, are
classified as carcinogenic, especially in conjunc-
max. [mm] [mm]
D b
125 7 22.2
125 –
75 30
82 –
Pull the plug out of the socket before carry-
ing out any work on the power tool.
The machine head can
be rotated in 90° incre-
ments. In this way, the
on/off switch can be
brought into a more fa-
vourable handling posi-
tion for particular ap-
plications, e.g. for left-
handed tool users.
Completely unscrew
English
English
-1
d [min ] [m/s]
11500 80
– 11500 80
– 11500 45
– 11500 80
English
1 609 92A 4ZW • 5.4.19