30" Double Oven Traditional Installation; 30" Double Oven Flush Mount Installation; Prior To Installation; Lifting The Appliance - Thermador ME301YP Guide D'installation

en-us Prior to installation

30" Double oven traditional installation

*Junction box location: above, left or right of the unit
within reach of the flexible conduit.
Control panel overlap: min. 3/8" (10mm) to max.
2" (51mm).
30" Double oven flush mount installa-
tion
Flush installation requires two side cleats to be attached
inside the cabinet frame, recessed from the front.
Top view bottom hinged door
10
Side view

Prior to installation

Prior to installation
Carry out these steps to prepare your appliance for in-
Prior to installation
stallation.

Lifting the appliance

Follow these recommendations to prevent injury and
damage to the appliance during lifting.
CAUTION
Risk of crushing!
DO NOT attempt to lift the unit by holding the oven's up-
per heating element.
Remove the bottom hinge oven door prior to installa-
¡
tion to access the necessary lifting points and to sig-
nificantly reduce the unit weight. For double ovens