Pur Line RAFY 82 Manuel D'utilisation page 14

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
TROUBLESHOOTING
Problem
No air blows out/ no heating
The unit can not be turned off
Too noise
No humidifying
No swing
WARRANTY
All the warranty terms finish 24 months after the buying date. It is absolutely necessary to show your buying invoice to
be covered by the warranty terms. The warranty covers any defect produced during the manufacturing or caused by the
raw material used in this product, and only in the event that the customer has followed the instructions and maintenance
showed in the user's manual, and only in the event that the installer has followed the installation directions. This warranty
does not cover any damage caused by accidents or negligence. The warranty only covers the customer in case that any
reparation has been done in our authorised repairing shops. The warranty DOES NOT COVER any damage or injury caused
to people, animals or things caused by an accident or the negligent use of this product. The warranty will be suspended in
case of any manipulation of unauthorised people or in case of non-original parts or components.
DISCARDINg WORN HOUSEHOLD DEVICES
The European directive 2002/96/EC pertaining to electrical and electronic waste prohibits such household goods
from being discarded with local refuse services. Worn devices must be collected separately to optimize the recovery
and recycling rates of the components therein to reduce detrimental effects on the environment and on human
health.
EN
Cause
1. No power
2. No operation
3. Some parts are damaged
1. "
" button or/and ON/OFF
button (POWER SWITCH on the top
cover) are not pressed
2. Some parts are damaged
3. Overheat
1. Foreign objects are inside the
unit
2. Motor is out of order
3. Air wheel is loose
1. Lack of water
2. Pump is out of order
3. Water pipe drops off
Swing motor is out of order
12
Solution
1. Connect the main lead in the
right way.
2. Press power switch and "FAN.ON"
or "HEAT.ON".
3. Send the unit to authorized
service agency.
1.Press "
" or/and the ON/OFF
button (POWER SWITCH on the top
cover)
2. Send the unit to authorized
service agency.
3. See RESET INSTRUCTION
1.Take off the back shell and
filtering net then take out the
objects
2 & 3. Send the unit to authorized
service agency
1. Add water.
2 & 3. Send the unit to authorized
service agency
1. Send the unit to authorized
service agency

Publicité

Table des Matières
loading

Table des Matières