Doro PhoneEasy 312ci Mode D'emploi page 6

Connection
1. Connect the curly cord to the handset and to socket marked
y on the telephone.
2. Connect the telephone line cord to a network wall socket and
to the K socket on the back of the telephone.
3. Lift the handset and listen for the dial tone.
Batteries
Four AA alkaline batteries are needed for the call memory and
speakerphone. When
batteries. Use only AA alkaline batteries of good quality.
Note!
Before installing or changing the batteries, make sure that
the telephone is not connected to the telephone network.
1. Disconnect the telephone line cord.
2. Remove the battery cover.
3. Insert the batteries ensuring correct battery polarity is
observed.
4. Replace the battery cover and reconnect the telephone line
cord.
English
Installation
BATT. LOW
2
is displayed, replace all 4