Remote Control - Sharp XL-B710 Mode D'emploi

4
3. INFO
Displays playback information.
4. INTRO
In CD/USB mode, every soundtrack will be played for 10 Sec.
5. (MONO/STEREO)
Stop play.
In standby mode, press and hold to switch to the
CLOCK SYNC mode.
In FM mode, switch between stereo or mono sound.
6. VOL+/VOL-
Increase/decrease the volume level.
7. Numeric keypad (0~9)
In CD/USB mode, select a track number for playback.
In FM mode, choose the preset radio station.
8. DIMMER
Adjust display brightness.
9.
Mute or resume the sound.
10. SHUFFLE
Select shuffl e play mode.
11. REPEAT
Select repeat play modes.
12.
Open or close disc compartment.
13. /SCAN
Play/pause/resume playback.
Press to confi rm a selection.
Press to perform auto scan for radio stations in FM mode.
14. /
In CD/USB/BT mode, skip to previous/next track.
In CD/USB mode, press and hold to rewind / fast forward a track/disc.
In FM mode, search radio stations manually, press and hold the button
to search automatically.
15. , (ALBUM/PRESET)
Navigate up/down through.
Select a previous/next preset station.
Skip to the previous/next album.
16. EQ
Select the preset equaliser.
17. BASS
Turn ON/OFF the bass enhancement.
18. SLEEP/TIMER
Set the sleep timer. In standby mode, press and hold to set the alarm
timer.
19. CLOCK
In standby mode, press and hold to activate clock setup. Display
current clock.
20. PROG
Program soundtracks.
Presets radio stations.

Remote Control

Max. 6 m
Control allows the unit to be operated from a distance.
Even if the Remote Control is operated within the eff ective range of 6m,
remote control operation may be impossible if there are any obstacles
between the unit and the remote control.
If the Remote Control is operated near other products which generate
infrared rays, or if other remote control devices using infra-red rays are
used near the unit, it may operate incorrectly. Conversely, the other
products may operate incorrectly.
First-time use:
The unit has a pre-installed lithium CR2025 battery. Remove the protective
tab to activate the remote control battery.
Remote control battery replacement
The remote control requires a CR2025, 3V Lithium battery.
1. Remove the screw from the underside of the remote control.
2. Push the tab on the side of the battery tray towards the tray.
3. Now slide the battery tray out of the remote control.
4. Remove the old battery. Place a new CR2025 battery into the battery
tray with the correct polarity (+/-) as indicated.
5. Slide the battery tray back into the slot in the remote control.
6. Secure the tray in place using the screw.